Undo Exec - Gestetner B147 Service Manual

5.7.3 UNDO EXEC

The menu "Undo Exec" (SP5-873-002) enables you to copy back application
programs from an SD card to the original SD card. You can use this program when,
for example, you have mistakenly copied some programs by using Move Exec
(SP5-873-001).
1. Turn the main switch off.
2. Insert the original SD card in SD Card Slot 1. The application program is copied
back into this card.
3. Insert the SD card (having stored the application program) to SD Card Slot 3.
The application program is copied back from this SD card.
4. Turn the main switch on.
5. Start the SP mode.
6. Select SP5-873-002 "Undo Exec."
7. Follow the messages displayed on the operation panel.
8. Turn the main switch off.
9. Remove the SD card from SD Card Slot 1
10. Remove the SD card from SD Card Slot 3 and insert it to SD Card Slot 1.
NOTE: This step assumes that the application programs in the SD card are
used by the machine.
11. Turn the main switch on.
12. Check that the application programs run normally.
SM
SD CARD APPLI MOVE
5-159 B147/B149/B190