HDD
3. REPLACEMENT AND ADJUSTMENT
3.1 HDD
1. Switch the operation power switch off.
2. Switch the main power switch off.
3. Disconnect the power cord from the power supply.
4. Replace the HDD. (Refer to the section "3. Replacement and Adjustment" in
the Service Manual of the appropriate machine.
5. Discard the used HDD
CAUTION
The customer engineer must consult with the key operator or system
administrator to decide how to handle the old HDD.
6. Connect the power cord to the power supply.
7. Switch on the main power switch.
8. Make a Sample Copy.
9. Check the overwrite erase icon [A] in front of the date in the upper right corner
of the operation panel display.
10. Confirm that the icon has changed from the display for data on disk [B] to no
data on disk [C]
NOTE: No SP settings are required for replacement of a defective HDD.
B692/B694
[A]
09/09/2003
14:13
Origi
Total
Copies
.
0
1
B692R906.WMF
[B]
0
6
[C]
B692R905.WMF
SM