Ardf; Ardf Side-To-Side And Leading Edge Registration - Gestetner B147 Service Manual

IMAGE ADJUSTMENT

3.2.2 ARDF

ARDF side-to-side and leading edge registration

Make a temporary test chart as shown above using A3/DLT (11 x 17 inch) paper.
1. Place the temporary test chart on the ARDF and make a copy from one of the
feed stations.
2. Check the registration, and adjust using the following SP modes if necessary.
SP Code
SP6-006-001
SP6-006-002
SP6-006-003
SP6-006-004
B147B149/B190
B146R964.WMF
What It Does
Side-to-Side Registration
Leading Edge Registration (Simplex)
Buckle: Duplex Front
Buckle: Duplex Rear
A
B
B146R965.WMF
3-4
A: Leading edge registration
B: Side-to-side registration
Adjustment Range
± 3.0 mm
± 42 steps
± 42 steps
± 45 steps
SM