Gestetner B147 Service Manual page 732

STAPLER UNIT
5. Install the timing belt [A].
6. Align the blue mark [B] on the gear with
the hole [C] in the frame, and install the
gear.
NOTE: The stapler is in the home
position when the blue mark and
the hole are aligned.
7. Remove the two thin tools that you
placed earlier to secure the gears in
position.
8. Install the spring [D], spacer [E], gears
[F][G], and timing belt [H].
9. Reassemble the whole stapler unit.
10. Check the operation.
B602
[B]
[D]
[E]
[F]
12
[A]
B602R925.WMF
[C]
B602R926.WMF
[H]
[G]
B602R927.WMF
SM