Gestetner B147 Service Manual page 376

COPY SERVICE MODE
8-151 T:Deliv Jobs/PC
These SPs count the total number of jobs (color or black-and-white) scanned
and sent to a folder on a PC (Scan-to-PC).
Note: At the present time, 8 151 and 8 155 perform identical counts.
8-155 S:Deliv Jobs/PC
These SPs count the total number of jobs (color or black-and-white) scanned
and sent with Scan-to-PC.
8-15x 1 B/W
8-15x 2 Color
• These counters count jobs, not pages.
• If the job is cancelled during scanning, it is not counted.
• If the job is cancelled while it is waiting to be sent, the job is not counted.
• If the job is cancelled during sending, it may or may not be counted, depending
on what stage of the process had been reached when the job was cancelled.
• Even if several files are combined for sending, the transmission counts as one
job.
8-161 T:PCFAX TX Jobs
8-163 F:PCFAX TX Jobs
• This counts fax jobs started from a PC using a PC fax application, and sending
the data out to the destination from the PC through the copier.
8-191 T:Total Scan PGS
8-192 C:Total Scan PGS
8-193 F:Total Scan PGS
8-195 S:Total Scan PGS
8-196 L:Total Scan PGS
• SP 8 191 to 8 196 count the number of scanned sides of pages, not the number
of physical pages.
• These counters do not count reading user stamp data, or reading color charts to
adjust color.
• Previews done with a scanner driver are not counted.
• A count is done only after all images of a job have been scanned.
• Scans made in SP mode are not counted.
B147/B149/B190
*CTL [0~9999999/ 0 / 1]
*CTL
*CTL
These SPs count the number of PC Fax
transmission jobs. A job is counted from when it
*CTL
is registered for sending, not when it is sent.
[0~9999999/ 0 / 1]
Note: At the present time, these counters
perform identical counts.
*CTL These SPs count the pages scanned by each
application that uses the scanner to scan
*CTL
images.
*CTL
[0~9999999/ 0 / 1]
*CTL
*CTL
5-88 SM