Paper Source Selection - Gestetner B147 Service Manual

PRINTER FUNCTIONS

Paper Source Selection

Tray Priority (Auto Tray Select)
The "Tray Priority" setting
determines the start of the tray
search when the user selects "Auto
Tray Select" with the driver. The
machine searches paper trays for
the specified paper size and type.
When no tray contains paper that
matches the paper size and type
specified by the driver, the controller
stops printing until the user loads the
correct paper.
The "Tray Priority" setting can be
specified in the following menu: 
> System Settings > Tray Paper
Settings > Paper Tray Priority:
Printer.
NOTE: The by-pass feed table is not part of the tray search.
Tray Locking
If "Tray Locking" is enabled for a tray, the controller skips the "locked" tray in the
tray search process.
The "Tray Locking" setting can be specified in the following menu:  > System
Settings > Tray Paper Settings > Paper Type: Tray # > Apply Auto Paper Select
(where the "#" indicates the tray number).
NOTE: The by-pass feed table cannot be unlocked (Tray Locking is always
enabled).
Manual Tray Select
If the selected tray does not have the paper size and type specified by the driver,
the controller stops printing until the user loads the correct paper.
B147/B149/B190
Priority Tray
Tray 1
Tray 2
LCT (Optional)
6-110
Start of
Tray Search
Tray 3 (Optional)
Tray 4 (Optional)
B146D575.WMF
SM