OPTIONAL UNIT
[A]
2. Install the two stud screws [A].
3. Mount the ARDF on the copier, and slide it to the front as shown.
NOTE: To avoid damaging the ARDF, grasp it as shown.
4. Fasten the two screws [B] to secure the ARDF.
5. Attach the left [C] and right [D] stopper brackets (Knob screw x 2 for each).
6. Connect the cable [E] to the copier.
7. Fasten the cable with the clamp [F].
B147/B149/B190
[E]
[B]
B597I901.WMF
[F]
1-28
[C]
B146I930.WMF
[D]
B146I937.WMF
SM