Gestetner B147 Service Manual page 346

COPY SERVICE MODE
5-913 Switchover Permission Time
Sets the amount of time to elapse while the machine is in standby mode (and the
operation panel keys have not been used) before another application can gain control
of the display.
5-961 Large Capacity Exit Mode
Selects whether or not all stapled copies are sent to Shift Tray 1 when the Two-Tray
finisher is installed.
5-967 Copy Server Set Function
Enables and disables the document server. This is a security measure that prevents
image data from being left in the temporary area of the HDD. After changing this
setting, you must switch the main switch off and on to enable the new setting.
5-974 [Cherry Server]
Specifies which version of ScanRouter, "Lite" or "Full", is installed.
5-974-1 Cherry Server Setting
5-989 [Loop Back Test]
Executes a communication test with peripherals by using a special tool (connector)
which is unique for each peripheral.
The machine checks if the communication with the peripherals is OK or NG; then
displays the result.
DFU
5-989-1 Duplex
5-989-3 Finisher
5-989-4 PSU
5-989-5 ADF
5-990 [SP print mode]
Prints out the SMC sheets.
5-990-1 All (Data List)
5-990-2 SP (Mode Data List)
5-990-3 User Program
5-990-4 Logging Data
5-990-5 Diagnostic Report
5-990-6 Non-Default
5-990-7 NIB Summary
5-990-8 Net File Log
5-990-21 Copier User Program
5-990-22 Scanner SP
5-990-23 Scanner User Program
B147/B149/B190
*CTL [3~30 / 3 / 1 s]
*CTL 0: OFF, 1: ON
*CTL 0: ON, 1: OFF
*CTL [ 0 or 1 / 0 / - ]
0: Lite
1: Full
5-58 SM