Gestetner B147 Service Manual page 357

7-206-2 Binding Staple
7-209 [Punch Counter]
Displays the number of times hole punching has been done.
7-209-1 Punch
7-401 [Total SC Counter]
Displays the number of SC codes detected.
7-401-1 SC Counter
7-403 [SC History]
Logs the SC codes detected.
The 10 most recently detected SC Codes are not displayed on the screen, but can be
seen on the SMC (logging) outputs.
7-403-1 Latest
7-403-2 Latest 1
7-403-3 Latest 2
7-403-4 Latest 3
7-403-5 Latest 4
7-403-6 Latest 5
7-403-7 Latest 6
7-403-8 Latest 7
7-403-9 Latest 8
7-403-10 Latest 9
7-502 [Total Paper Jam Counter]
Displays the total number of jams detected.
7-502-1 Total Jam
7-503 [Total Original Jam Counter]
Displays the total number of original jams.
7-503-1 Original Jam counter
7-504 [Paper Jam Location]
D: Duplex, MB: Mail Box, F; Finisher, E: External, I: Internal
ON: On check, OFF: Off Check
Displays the number of jams according to the location where jams were detected.
NOTE: The LCT is counted as the 3rd feed station.
7-504-3 Tray 1: ON
7-504-4 Tray 2: ON
7-504-5 Tray 3/LCT: ON
7-504-6 Tray 4: ON
7-504-8 Regist.: ON
7-504-9 External Tray: ON
7-504-10 Internal Tray: ON
7-504-11 Duplex: ON
7-504-12 Duplex Exit 1: ON
7-504-13 Duplex Exit 2: ON
SM
*CTL [ 0 to 9999999 / 0 / 1/step ]
*CTL [ 0 to 9999 / 0 / 1/step ]
*CTL
*CTL [ 0 to 9999 / 0 / 1 sheet/step ]
*CTL [ 0 to 9999 / 0 / 1 original/step ]
*CTL
5-69
COPY SERVICE MODE
B147/B149/B190