Gestetner B147 Service Manual page 309

[Vcnt / Vref] Vcnt / Vref ([Color])
2-224
Adjusts the Vcnt value manually.
The value in this SP mode is effective until after the next process control self-check.
To always use this value for some reason, select proportional control supply mode
with SP2-208-1 to 4.
NOTE: The main switch must be turned off and on to effect the setting change.
2-224-1 Vcnt [K]
2-224-2 Vcnt [Y]
2-224-3 Vcnt [M]
2-224-4 Vcnt [C]
Adjusts the Vref value manually.
The value in this SP mode is effective until the next process control self-check. To
always use this value for some reason, select proportional control supply mode with
SP2-208-1 to 4.
2-224-5 Vref [K]
2-224-6 Vref [Y]
2-224-7 Vref [M]
2-224-8 Vref [C]
2-301 [Transfer Current]
([Color Mode, Color], Paper Tray or By-pass, Simplex or Duplex, Process Speed)
Paper Type -> TH: Thick Paper, SP: Special Paper
Adjusts the transfer current for each color and each print mode.
NOTE: If the transfer current is increased too much, image offset may occur
especially in halftone areas.
2-301-1 [K]P S 125
2-301-2 [K]P S 185
2-301-3 [K]P D 125
2-301-4 [K]P D 185
2-301-5 [K]B S 62.5
2-301-6 [K]B S 125
2-301-7 [K]B S 185
2-301-8 [FC,K]P S 62.5
2-301-9 [FC,K]P S 125
2-301-10 [FC,Y]P S 62.5
2-301-11 [FC,Y]P S 125
2-301-12 [FC,M]P S 62.5
2-301-13 [FC,M]P S 125
2-301-14 [FC,C]P S 62.5
2-301-15 [FC,C]P S 125
2-301-16 [FC,K]P D 62.5
2-301-17 [FC,K]P D 125
2-301-18 [FC,Y]P D 62.5
2-301-19 [FC,Y]P D 125
2-301-20 [FC,M]P D 62.5
2-301-21 [FC,M]P D 125
2-301-22 [FC,C]P D 62.5
2-301- [FC,C]P D 125
23
2-301- [FC,K]B S 62.5
24
2-301-25 [FC,K]B S 125
SM
*BCU [ 0 to 22.0 / 10.0 / 0.1 V/step ] FA
#
*BCU [ 0 to 5.0 / 2.8 / 0.1 V/step ]
*BCU
*BCU
*BCU
*BCU [ 0 to 50 / 15 / 1 µA/step ]
*BCU
[ 0 to 50 / 22 / 1 µA/step ]
*BCU [ 0 to 50 / 16 / 1 µA/step ]
*BCU [ 0 to 50 / 27 / 1 µA/step ]
*BCU
[ 0 to 50 / 5 / 1 µA/step ]
*BCU [ 0 to 50 / 15 / 1 µA/step ]
*BCU
[ 0 to 50 / 22 / 1 µA/step ]
*BCU
[ 0 to 50 / 6 / 1 µA/step ]
*BCU [ 0 to 50 / 13 / 1 µA/step ]
*BCU
[ 0 to 50 / 6 / 1 µA/step ]
*BCU [ 0 to 50 / 10 / 1 µA/step ]
*BCU [ 0 to 50 / 6 / 1 µA/step ]
*BCU
[ 0 to 50 / 10 / 1 µA/step ]
*BCU [ 0 to 50 / 6 / 1 µA/step ]
*BCU [ 0 to 50 / 10 / 1 µA/step ]
*BCU
[ 0 to 50 / 9 / 1 µA/step ]
*BCU [ 0 to 50 / 15 / 1 µA/step ]
*BCU [ 0 to 50 / 7 / 1 µA/step ]
*BCU
[ 0 to 50 / 10 / 1 µA/step ]
*BCU [ 0 to 50 / 7 / 1 µA/step ]
*BCU
[ 0 to 50 / 10 / 1 µA/step ]
*BCU
[ 0 to 50 / 7 / 1 µA/step ]
*BCU [ 0 to 50 / 10 / 1 µA/step ]
*BCU
[ 0 to 50 / 6 / 1 µA/step ]
*BCU [ 0 to 50 / 13 / 1 µA/step ]
5-21
COPY SERVICE MODE
B147/B149/B190