Gestetner B147 Service Manual page 985

COPY SERVICE MODE
1-105 [Fusing Temperature]
1-105-2 P: Ready
Sets the pressure roller temperature for the printing ready condition.
Ready temperature = (Target temperature specified in SP1-104-25 or 105-3 to 28) –
Temperature specified in this SP mode
The following SPs set the target operating temperatures of the heating and pressure
rollers in various modes. (The default settings are different for N. America and
Eur./Asia)
1-105-4 H:N [K] S 125
1-105-5 H:N [K] S 185
⇒
1-105-6 H:N [K] D 125
1-105-7 H:N [K] D 185
1-105-8 H:N[FC] S 62.5
1-105-9 H:N[FC] S 125
1-105-10 H:N[FC] D 62.5
⇒
1-105-11 H:N[FC] D 125
1-105-13 H:OHP
1-105-15 P:N [K] S 125
1-105-16 P:N [K] S 185
⇒
1-105-17 P:N [K] D 125
1-105-18 P:N [K] D 185
1-105-19 P:N[FC] S 62.5
1-105-20 P:N[FC] S 125
1-105-21 P:N[FC] D 62.5
⇒
1-105-22 P:N[FC] D 125
1-105-24 P:OHP
1-105-26 H:TH
1-105-28 P:TH
1-105-29 H:Envelop
1-105-30 P:Envelop
1-105-31 H: Slow Down
Sets the heating roller temperature for the printing start condition when changing the
process speed.
Fusing temperature must be decreased when the machine changes to a process
speed that is slower than the current process speed (for example, when the speed
changes from 185 mm/s to 62.5 mm/s). The machine idles while reducing the fusing
temperature. When the fusing temperature becomes lower than the ready
temperature, the machine starts printing.
Ready Temperature = Target temperature + Temperature specified in this SP mode.
1-105-32 P: Slow Down
Sets the pressure roller temperature for the printing start condition when changing the
process speed.
1-105-33 H:SP 62.5
1-105-34 H:SP 125
1-105-35 H:SP 185
1-105-36 P:SP 62.5
1-105-37 P:SP 125
1-105-38 P:SP 185
⇒
** Requires Engine firmware 1.09C or later.
1-106 [Temperature Display] Fusing Temperature Display (Heating or Pressure)
Displays the current temperature of the heating and pressure rollers.
1-106-1 Heat Roller
1-106-2 Pressure Roller
B147/B149
*BCU [ 10 to 100 / NA: 10, EU: 20 / 1oC/step ]
*BCU
[ 100 to 190 / NA: 180, EU: 175 / 5°C/step]
*BCU
[ 100 to 190 / NA: 180, EU: 180 / 5°C/step]
*BCU
[ 100 to 190 / NA: 170, EU: 165 / 5°C/step] **
*BCU
[ 100 to 190 / NA: 175 , EU: 175 / 5°C/step]
*BCU
[ 100 to 190 / NA: 150, EU: 150 / 5°C/step]
*BCU
[ 100 to 190 / 180 / 5°C/step]
*BCU
[ 100 to 190 / NA: 145, EU: 145/ 5°C/step]
*BCU
[ 100 to 190 / NA: 170, EU: 170 / 5°C/step] **
*BCU
[ 100 to 190 / 165 / 5°C/step]
*BCU
[ 0 to 190 / NA: 160, EU: 155 / 5°C/step]
*BCU
[ 0 to 190 / NA: 155, EU: 160 / 5°C/step]
*BCU
[ 0 to 190 / NA: 150, EU: 145 / 5°C/step] **
*BCU
[ 0 to 190 / NA: 145, EU: 155 / 5°C/step]
*BCU
[ 0 to 190 / NA: 125, EU: 130 / 5°C/step]
*BCU
[ 0 to 190 / 160 / 5°C/step]
*BCU
[ 0 to 190 / NA: 120, EU: 125 / 5°C/step]
*BCU
[ 0 to 190 / NA: 150, EU: 150 / 5°C/step] **
*BCU
[ 0 to 190 / 150 / 5°C/step]
*BCU
[ 0 to 190 / 175 / 5°C/step]
*BCU
[ 0 to 190 / 155 / 5°C/step]
*BCU
[ 0 to 190 / 175 / 5°C/step]
*BCU
[ 0 to 190 / 155 / 5°C/step]
*BCU
[ 1 to 20 / 5 / 1°C/step]
*BCU
[ 1 to 20 / 10 / 1°C/step]
*BCU
[ -20 to +30 / +10 / 1°C/step]
*BCU
[ -20 to +30 / +10 / 1°C/step]
*BCU
[ -20 to +30 / +10 / 1°C/step]
*BCU
[ -20 to +30 / +10 / 1°C/step]
*BCU
[ -20 to +30 / +10 / 1°C/step]
*BCU
[ -20 to +30 / +20 / 1°C/step]
[ 0 to 200 / - / 5°C/step]
5-10
Rev. 06/2004
SM