Waste Toner Vibrator - Gestetner B147 Service Manual

PHOTOCONDUCTOR UNIT

Waste Toner Vibrator

The waste toner vibrator contains one motor [M]. The motor operates for about one
second at a time. Its vibration prevents the waste toner from clogging the waste
toner path.
The table lists the conditions under which the motor operates.
Machine status
During machine start (machine
initialization)
At the beginning of the process
control
Printing jobs that output five or less
papers
Printing jobs that output 6 or more
papers
Suppose: The copier executes two jobs, the first job outputs one paper, and the
second job outputs two papers. In this case, the motor operates one time at the
end of the second job (see
Suppose: The copier executes one job, and the job outputs 12 papers. In this case,
the motor operates one time during the fifth printing, one time during the tenth
printing, and one more time at the job end (see
Suppose: The copier executes two jobs, the first job outputs one paper, and the
second job outputs 12 papers. In this case, the motor operates one time during the
fifth printing of the second job, one time during the tenth printing of the second job,
and one more time at the end of the second job (see
condition ).
B147/B149/B190
Two times
One time
At the job end if 3 or more papers have been output
since the previous operation (of the motor) ( )
Every five papers and at the job end ( )
).
6-56
Motor operation
).
; This case does not satisfy
SM