Gestetner B147 Service Manual page 66

OPTIONAL UNIT
6. Adjust the position of the connection
bracket [A] as necessary ( x 2):
• Upper position for the copier with the
two-tray paper feed unit or LCT.
• Lower position for the copier with the
one-tray paper feed unit.
7. Connect the finisher [B] with the copier
( x 1).
8. Connect the finisher cable to the
connector of the copier.
9. Install the two trays [C] ( x 1 for each).
10. Extend the external tray of the copier
(see step 2).
11. Turn the main switch on and check the
operation.
B147/B149/B190
[A]
1-32
B146I908.WMF
[B]
B146I909.WMF
B146I910.WMF
[C]
SM