Gestetner B147 Service Manual page 401

NOTE: Memory Clear (SP5-801 & 7-808)
The following tables list the items that are cleared. The serial number information,
meter charge setting (SP5-930), and meter charge counters (SP7-003) are not
cleared.
5-801 [Memory Clear]
5-801-3 SCS
5-801-4 IMH
5-801-5 MCS
5-801-6 Copier application
5-801-7 Fax application
5-801-8 Printer application
5-801-9 Scanner application
5-801-10 Netfile application
5-801-11 NCS
5-801-12 IPU
5-801-13 R-Fax
5-998 [Memory Clear]
5-998-1 ENG Setting
5-998-2 ENG Counter
7-808 [Counter Clear]
7-808-1 Counter Clear
SM
SP5-009, 101, 104, 305, 812, 833, 961, and 970
SP7-101, 204, 209, 401, 502, 504, 506, and 507
No SP modes are cleared. But, all files stored in the
HDD are cleared.
No SP modes are cleared.
Initializes all copier application settings.
Initializes the fax reset time, job login ID, all TX/RX
settings, local storage file numbers, and off-hook timer.
The following service settings:
•
Bit switches
•
Gamma settings (User & Service)
•
Toner Limit
The following user settings:
•
Tray Priority
•
Menu Protect
•
System Setting except for setting of Energy Saver
•
I/F Setup (I/O Buffer and I/O Timeout)
•
PCL Menu
Initializes the scanner defaults for the scanner and all
the scanner SP modes.
Deletes the network file application management files
and thumbnails, and initializes the job login ID.
All setting of Network Setup (User Menu)
Clears the IPU settings
Initializes the job login ID, SmartNetMonitor for
Admin, job history, and local storage file numbers.
All engine related SP modes except for the following:
• Serial number information
•
SP modes related to meter charge
•
Counters and logging data
All counters and logging data related to engine
SP7-101, 204, 209, 502, 504, 506, and 507
5-113
COPY SERVICE MODE
B147/B149/B190