Firmware Update Error - Gestetner B147 Service Manual

FIRMWARE UPDATE

Firmware Update Error

If a firmware update error occurs, this means the update was cancelled during
the update because the module selected for update was not on the SD card.
Recovery After Power Loss
If the ROM update is interrupted as a result of accidental loss of power while the
firmware is updating, then the correct operation of the machine cannot be
guaranteed after the machine is switched on again. If the ROM update does not
complete successfully for any reason, then in order to ensure the correct operation
of the machine, the ROM update error will continue to be displayed until the ROM
is updated successfully.
In this case, just insert the card once again and switch on the machine to continue
the firmware download automatically from the card without the menu display.
B147/B149/B190
PCcard -> ROM
Reboot after card insert.
BLC2 eplot Card No.:1/1
5-146
E82
B146S922.WMF
SM