Gestetner B147 Service Manual page 254

SC TABLE
SC No. Item
SC 998 Application start No applications start within 60
error seconds after the power is
turned on.
B147/B149/B190
Definition Possible Cause
• Loose connection of
RAM-DIMM, ROM-
DIMM
• Defective controller
• Software problem
Related
Troubleshooting Procedure
SCs
1. Turn the main switch off and on.
2. Check if the RAM-DIMM and ROM-
DIMM are properly connected.
3. Reinstall the controller system
firmware.
4. Replace the controller.
4-52
Type
CTL
SM