Usb Sp Settings - Gestetner B147 Service Manual

USB SP Settings

The following SP commands are available. However, only one setting may require
adjustment and this setting should be performed only if the customer is
experiencing USB data transmission errors.
NOTE: Do not change the settings marked "DFU". These settings are for design
and factory use only.
SP No. Name
5-844-001 Transfer Rate
5-844-002 Vendor ID
5-844-003 Product ID
5-844-004 Dev. Release
Number
SM
Function
Adjusts the USB transfer rate. Do not change the
setting unless there is a data transfer error using the
USB high speed mode.
HS/FS: High speed/Full speed auto adjust
(480Mbps/12Mbps)
FS: Full speed (12Mbps fixed)
Displays the vendor ID. DFU
Displays the product ID. DFU
Displays the development release version number.
DFU
1-57
OPTIONAL UNIT
B147/B149/B190