Gestetner B147 Service Manual page 776

STAPLING
Two Staples
1. Before the stapler slide motor starts,
the stapler is in the ready position [G].
2. The stapler slide motor starts to slide
the stapler to the front. The controller
counts the pulses of the stapler slide
motor.
3. While moving to the front, the stapler
lowers the stack-tray stopper [J].
4. When the pulse count reaches the
predefined number (not adjustable), the controller stops the stapler slide motor.
The stapler is in the first stapling position [H].
5. The stapler/folder motor drives the stapler. The stapler staples the paler.
6. The stapler slide motor starts to slide the stapler to the front. The controller
counts the pulses of he stapler slide motor.
7. When the pulse cont reaches the predefined number (not adjustable), the
controller stops the stapler slide motor. The stapler is in the second stapling
position [I].
8. The stapler/folder motor drives the stapler. The stapler staples the paper.
Saddle Stitch
1. The stack-tray upper and lower rollers
transport the paper to the stapler unit
until the center of the paper [K]
reaches the stapling positions (!
3.7.4).
2. The stapler operates as described in
the previous paragraph (! Two
Staples).
B602
B602D924.WMF
B602D925.WMF
56
[G]
[H]
[J]
[I]
[K]
SM