Transfer Belt Cleaning - Gestetner B147 Service Manual

IMAGE TRANSFER AND PAPER SEPARATION

6.11.4 TRANSFER BELT CLEANING

[C]
[A]
[D]
[B]
B146D567.WMF
[E]
The transfer belt cleaning unit removes toner (during printing) and the ID sensor
patterns (during process control or automatic line position adjustment) on the belt.
Belt cleaning is completed while the transfer belt makes one rotation. The transfer
unit drive motor [A] drives the unit.
The cleaning brush [B] always contacts the transfer belt [C], and removes waste
toner from the belt. The cleaning blade [D] in the cleaning unit scrapes the toner off
the transfer belt. The toner collection auger [E] transports the toner towards the
waste toner collection duct.
SM 6-85 B147/B149/B190