Installation Procedure - Gestetner B147 Service Manual

Installation Procedure


CAUTION
Before installing this option, do the following:
1. If there is a printer option in the machine, print out all data in the printer
buffer.
2. Press the operation switch to be the standby mode. Make sure the
power LED is not lit then, turn off the main switch and disconnect the
power cord and the network cable.
[B]
B604I901.WMF
1. Remove the "LINE 2" cover [A] on the fax-controller board.
2. Remove the fax controller board [B] ( x 1,  x 4).
SM
G3 INTERFACE UNIT
7
[A]
B603