Copy Service Mode - Gestetner B147 Service Manual

5.2 COPY SERVICE MODE

5.2.1 SERVICE MODE TABLE
SP1-XXX (Feed)
1-001 [Lead Edge Reg.] Leading Edge Registration
(Paper Type, [Color ], Process Speed), Paper Type -> N: Normal, OHP, TH: Thick
Adjusts the leading edge registration by changing the registration clutch operation
timing for each mode.
1-001-1 Normal [K] 62.5
1-001-2 Normal [K] 125
1-001-3 Normal [K] 185
1-001-4 Normal [FC] 62.5
1-001-5 Normal [FC] 125
1-001-6 Thick [K]
1-001-7 Thick [FC]
1-001-8 OHP [K]
1-001-9 OHP [FC]
1-002 [Side to Side Reg.] Side-to-Side Registration
Adjusts the side-to-side registration by changing the laser main scan start position for
each mode.
1-002-1 By-pass Table
1-002-2 Paper Tray 1
1-002-3 Paper Tray 2
1-002-4 Paper Tray 3
1-002-5 Paper Tray 4
1-002-6 Duplex
1-003 [Paper Buckle] Paper Buckle
(Paper Tray or By-pass, Paper Type, Process Speed), Paper Type: N: Normal, TH:
Thick
Adjusts the amount of paper buckle at the registration roller by changing the paper
feed timing.
1-003-1 Paper Tray 62.5
1-003-2 Paper Tray 125
1-003-3 Paper Tray 185
1-003-4 By-pass N 62.5
1-003-5 By-pass N 125
1-003-6 By-pass N 185
1-003-7 By-pass TH
1-003-8 By-pass OHP
SM
*BCU [ -10.0 to 10.0 / 0.0 / 0.1 mm/step ] FA
*BCU
*BCU
*BCU
*BCU
*BCU
*BCU
*BCU
*BCU
*BCU [ -10.0 to 10.0 / 0.0 / 0.1 mm/step ] FA
*BCU
*BCU
*BCU [ -10.0 to 10.0 / 0.0 / 0.1 mm/step ]
*BCU
*BCU
*BCU [ -5 to 5 / 0 / 1 mm/step ]
*BCU
*BCU
*BCU
*BCU
*BCU
*BCU
*BCU
5-7
COPY SERVICE MODE
B147/B149/B190