Gestetner B147 Service Manual page 383

8-321 T:Scan PGS/Comp
These SPs count by compression method the total number of pages
scanned.
8-325 S:Scan PGS/Comp
These SPs count by compression method the total number of pages
scanned by the Scan application.
Note: At the present time, 8 321 and 8 325 perform identical counts.
8-32x 1 JPEG
8-32x 2 JPEG2000
8-32x 3 TIFF (Comp OFF)
8-32x 4 TIFF (Comp ON)
8-32x 5 PDF
8-32x 6 Other
8-381 T:Total PrtPGS
8-382 C:Total PrtPGS
8-383 F:Total PrtPGS
8-384 P:Total PrtPGS
8-385 S:Total PrtPGS
8-386 L:Total PrtPGS
8-387 O:Total PrtPGS
• When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT
page is counted as 2.
• When several documents are merged for a print job, the number of pages stored
are counted for the application that stored them.
• These counters are used primarily to calculate charges on use of the machine,
so the following pages are not counted as printed pages:
• Blank pages in a duplex printing job.
• Blank pages inserted as document covers, chapter title sheets, and slip
sheets.
• Reports printed to confirm counts.
• All reports done in the service mode (service summaries, engine
maintenance reports, etc.)
• Test prints for machine image adjustment.
• Error notification reports.
• Partially printed pages as the result of a copier jam.
SM
*CTL [0~9999999/ 0 / 1]
*CTL [0~9999999/ 0 / 1]
*CTL These SPs count the number of pages printed
by the customer. The counter for the application
*CTL
used for storing the pages increments.
*CTL
[0~9999999/ 0 / 1]
*CTL
The L: counter counts the number of pages
*CTL
stored from within the document server mode
*CTL
screen at the operation panel. Pages stored
*CTL
with the Store File button from within the Copy
mode screen go to the C: counter.
5-95
COPY SERVICE MODE
B147/B149/B190