Results; Selectable Options - Gestetner B147 Service Manual

receive reports of errors that occurred between the SMTP server and the receiving
terminal.
The interval between attempts to resend mail to the same destination when an
SMTP error occurs is the same as for G3 fax transmission.
To view what happens when an error occurs when the machine is receiving, refer
to the Mail Reception section.

Results

The transmission result is listed in the Journal. The file list for e-mail transmissions
is created in the same way as for G3 memory transmissions. The TTI for the mail
message includes the word "Mail" at the head of the information in the TTI column.

Selectable Options

These options are available for selection:
• With the default settings, the scan resolution can be either standard or detail.
Inch-mm conversion before TX depends on IFAX SW01 Bit 7. Detail resolution
will be used if Super Fine resolution is selected, unless Fine resolution is enabled
with IFAX SW01.
• The requirements for originals (document size, scan width, and memory
capacity) are the same as for G3 fax memory tx.
• The default compression is TIFF-F format.
• IFAX SW00: Acceptable paper widths for sending
• IFAX SW09: Maximum number of attempts to the same destination
SM
INTERNET MAIL COMMUNICATION
21 IFAX