Gestetner B147 Service Manual page 1025

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – DSc332/DSc338/DSc328
LANIER – LD232c/LD238c/LD228c
RICOH – AFICIO 2232C/2238C/2228C
SAVIN – C3224/C3828/C2820
SUBJECT: "ADD PAPER TO TRAY 1 (2)" WITH PAPER IN THE TRAY
SYMPTOM:
The message "Add paper to Tray1 (2)" is displayed even if there is paper in paper tray 1 or 2.
NOTE: This symptom does not occur in the LCT or paper bank.
CAUSES:
1. The paper tray holder (Item 17: See picture below) moves forward due to the defective rear metal board.
This does not let the paper tray close correctly. This tends to occur in tray 2 because of the machine's
layout.
2. The paper tray holder cannot hold the paper tray firmly if these occur:
- The paper tray gets pushed and pulled many times.
- The paper tray holder becomes worn.
Copyright  2004 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN
B147/B149/B190 – 011 10/19/2004
Page 1 of 2