Gestetner B147 Service Manual page 344

COPY SERVICE MODE
5-857-5 Save to HDD
Saves the debug log in memory to the HDD.
A unique file name is generated to avoid overwriting existing file names on the SD
Card. Up to 4MB can be copied to an SD Card. 4 MB segments can be copied one
by one to each SD Card.
5-857-9 Copy HDD to SD Card (Latest 4 MB)
5-857-10 Copy HDD to SD Card (Latest 4 MB Any Key)
5-857-11 Erase HDD Debug Data
5-857-12 Erase SD Card Debug Data
5-857-13 Free Space on SD Card
5-857-14 Copy SD to SD (Latest 4 MB)
5-857-15 Copy SD to SD (Latest 4 MB Any Key)
5-857-16 Make HDD Debug
5-857-17 Make SD Debug
5-858 Debug Save When
These SPs select the content of the debugging information to be saved to the
destination selected by SP5857 002.
SP5858 3 stores one SC specified by number. Refer to Section 4 for a list of SC error
codes.
5-858-1 Engine SC Error
5-858-2 Controller SC Error
5-858-3 Any SC Error
5-858-4 Jam
5-859 Debug Save Key No.
5-859-1 Key 1
5-859-2 Key 2
5-859-3 Key 3
5-859-4 Key 4
5-859-5 Key 5
5-859-6 Key 6
5-859-7 Key 7
5-859-8 Key 8
5-859-9 Key 9
5-859-10 Key 10
B147/B149/B190
DFU
*CTL
Stores SC codes generated by copier engine errors.
Stores SC codes generated by GW controller errors.
[0~65535 / 0 / 1]
Stores jam errors.
*CTL
These SPs allow you to set up to 10 keys for log files
for functions that use common memory on the
controller board. ( 5.3.1)
[-9999999~9999999 / 0 / 1]
5-56 SM