Transfer And Paper Transport Unit; Transfer Unit - Gestetner B147 Service Manual

TRANSFER AND PAPER TRANSPORT UNIT

3.10 TRANSFER AND PAPER TRANSPORT UNIT

3.10.1 TRANSFER UNIT

NOTE: When removing or installing the transfer unit, grasp the central areas of the
front and rear frame. Do not touch the transfer belt [A]. Do not damage the
entrance mylar [B].
After replacing the transfer unit, reset the maintenance counter, SP7-804-16, and
conduct the output check, SP5-804-74.
[C]
1. Duplex feed unit (
2. Turn the release lever counterclockwise. (
3. Pull out the transfer unit [C] until the entire unit is visible ( x 2).
4. Grasp the transfer unit grips as shown above. Lift the unit to remove it.
NOTE: Grasp the front grip. Use caution not to damage the actuator on the rear.
After replacing the transfer unit:
• Perform forced line position adjustment (SP5-993-002 or  > Maintenance >
Color Registration).
• Print the 1-dot grid pattern on A3/11" x 17" paper and check the color shift level
( 4.6.3).
B147B149/B190
[A]
3.4.1)
3.8)
3-48
[B]
B146R958.WMF
SM