Gestetner B147 Service Manual page 350

COPY SERVICE MODE
5-995 [ColorGapAdj2] Color Gap Adjustment 2
5-995-20 Trans Drv FB
5-997 [Test Pattern]
5-997-1 Tray Selection
Selects the tray for making a test print.
NOTE: The machine makes a test pattern on the paper size loaded in the selected
paper tray.
5-997 2 Pattern
Selects a test pattern.
5-997-3 Single Color
Selects the color for making a test pattern.
5-997-4 Color Mode
Selects the color mode for making a test print.
5-997-5 Resolution
Selects the resolution for making a test print.
B147/B149/B190
*BCU Enables or disables the transfer belt feedback
feature.
[ 0 or 1 / 0 / - ]
0: Enabled
1: Disabled
[ 0 to 4 / 1 / 1/step ]
0: By-pass Table
2: Tray 2
4: Tray 4
[ 0 to 23 / 0 / 1/step ]
0: None
1: 1-dot sub-scan line
2: 2-dot sub-scan line
3: 1-dot main-scan line
4: 2-dot main-scan line
5: 1-dot grid pattern (Fine)
6: 2-dot grid pattern (Fine)
7. 1-dot grid pattern (Rough)
8. 2-dot grid pattern (Rough)
9. 1-dot slant grid pattern
10. 2-dot slant grid pattern
11. 1-dot pattern
12. 2-dot pattern
13. 4-dot pattern
14. 1-dot trimming pattern
15. 2-dot trimming pattern
16. Cross stitch: sub-scan
17. Cross stitch: main-scan
18. Belt pattern (Horizontal)
19. Belt pattern (Vertical)
20. Checkered Flag
21. Grey scale (Vertical)
22. Grey scale (Horizontal)
23. Solid
[0 to 6 / 6 / 1/step] Alphanumeric
0: Red
2: Blue
4: Magenta
6: Black
[0 or 1 / 0 / 1/step] Alphanumeric
0: Full Color
[0 to 2 / 1 / 1/step] Alphanumeric
0: 600x600
2: 1200x1200
5-62
1: Tray 1
3: Tray 3
1: Green
3: Yellow
5: Cyan
1: Single Color
1: 1800x600
SM