SD CARD APPLI MOVE
5.7.2 MOVE EXEC
The menu "Move Exec" (SP5-873-001) enables you to copy application programs
from the original SD card to another SD card.
1. Turn the main switch off.
2. Make sure that an SD card is in SD Card Slot 1. The application program is
copied into this SD card.
3. Insert the SD card (having stored the application program) to SD Card Slot 3.
The application program is copied from this SD card.
4. Turn the main switch on.
5. Start the SP mode.
6. Select SP5-873-001 "Move Exec."
7. Follow the messages displayed on the operation panel.
8. Turn the main switch off.
9. Remove the SD card from SD Card Slot 3.
10. Turn the main switch on.
11. Check that the application programs run normally.
B147/B149/B190
5-158
SM