Gestetner B147 Service Manual page 335

5-810 [SC Reset]
Resets a type A service call condition.
NOTE: Turn the main switch off and on after resetting the SC code.
5-810-1 SC Reset
5-811 [Machine Serial No.] Machine Serial Number Display
Displays the machine serial number.
5-811-2 SN Display
5-812 [Service Tel. No. Setting]
5-812-1 Service
Sets the telephone number for a service representative. This number is printed on
the Counter List, which can be printed with the user's "Counter" menu.
This can be up to 20 characters (both numbers and alphabetic characters can be
input).
5-812-2 Facsimile
Sets the fax or telephone number for a service representative. This number is
printed on the Counter List, which can be printed with the user's "Counter" menu if
the Meter Charge mode is selected with SP5-930-1.
This can be up to 13 characters (both numbers and alphabetic characters can be
input).
5-812-3 Supply
Use this to input the telephone number of your supplier for consumables. Enter the
number and press #.
Press the  key to input a pause. Press the "Clear modes" key to delete the
telephone number.
5-812-4 Operation
Use this to input the telephone number of your sales agency. Enter the number and
press #.
Press the  key to input a pause. Press the "Clear modes" key to delete the
telephone number.
5-816 [Remote Service]
5-816-1 I/F Setting
5-816-2 CE Call
5-816-3 Function Flag
5-816-4 Communication Test Call
5-816-5 Device Information Call
5-816-6 Device Information Call
Display Setting
5-816-7 SSL Disable
5-816-8 RCG Connect Timeout
5-816-9 RCG Write Timeout
5-816-10 RCG Read Timeout
5-816-11 Port 80 Enable
SM
*BCU
*
CTL
*CTL
*CTL
*CTL
*CTL [ 0 to 1 / 0 / 1/step] DFU
0: Disable
1: Enable
5-47
COPY SERVICE MODE
B147/B149/B190