Gestetner B147 Service Manual page 397

8-681 T:PCFAX TXPGS
8-683 F:PCFAX TXPGS
• This counts pages sent from a PC using a PC fax application, from the PC
through the copier to the destination.
• When sending the same message to more than one place using broadcasting,
the pages are only counted once. (For example, a 10-page fax is sent to location
A and location B. The counter goes up by 10, not 20.)
8-691 T:TX PGS/LS
8-692 C:TX PGS/LS
8-693 F:TX PGS/LS
8-694 P:TX PGS/LS
8-695 S:TX PGS/LS
8-696 L:TX PGS/LS
NOTE: 1) Print jobs done with Web Image Monitor and Desk Top Binder are
added to the count.
2) If several documents are merged for sending, the number of pages
stored are counted for the application that stored them.
3) When several documents are sent by a Fax broadcast, the F: count is
done for the number of pages sent to each destination.
8-701 TX PGS/Port
These SPs count the number of pages sent by the physical port used to
send them. For example, if a 3-page original is sent to 4 destinations via
ISDN G4, the count for ISDN (G3, G4) is 12.
8-701 1 PSTN-1
8-701 2 PSTN-2
8-701 3 PSTN-3
8-701 4 ISDN (G3,G4)
8-701 5 Network
8 741 RX PGS/Port
These SPs count the number of pages received by the physical port
used to receive them.
8-741 1 PSTN-1
8-741 2 PSTN-2
8-741 3 PSTN-3
8-741 4 ISDN (G3,G4)
8-741 5 Network
SM
*CTL These SPs count the number of pages sent by PC
Fax. These SPs are provided for the Fax
*CTL
application only, so the counts for SP8 681 and
SP8 683 are the same.
[0~9999999/ 0 / 1]
*CTL These SPs count the number of pages sent from
the document server. The counter for the
*CTL
application that was used to store the pages is
*CTL
incremented.
*CTL
[0~9999999/ 0 / 1]
*CTL
The L: counter counts the number of pages stored
*CTL
from within the document server mode screen at
the operation panel. Pages stored with the Store
File button from within the Copy mode screen go
to the C: counter.
*CTL [0~9999999/ 0 / 1]
*CTL [0~9999999/ 0 / 1]
5-109
COPY SERVICE MODE
B147/B149/B190