07/08/22 17:27:15 32SND620_100
LIGHT CONTROL SWITCH
Turn signal
1.
2.
Off
3.
Position and indicator lights
4.
Headlights on
5.
High beams
6.
Flash high beams
Push down or up on
Turn Signal
−
the lever to signal a turn. To signal a
lane change, push lightly on the
lever in the proper direction and hold
it. The lever will return to centre
when you release it or complete a
turn.
Headlights On
Turning the
−
switch to the ''
'' position turns
on the position lights, tail-lights,
instrument panel lights, and rear
licence plate lights.
Turning the switch to the ''
position turns on the headlights. If
you leave the lights on with the key
removed from the ignition switch,
you will hear a reminder chime when
you open the driver's door.
When the light switch is in the
''
'' or the ''
'' position, the
lights on indicator comes on as a
reminder.
Turn Signals and Headlights
Push the lever
High Beams
−
forward until you hear a click. The
high beam indicator will come on
(see page
82
). Pull the lever back to
return to the low beams.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
''
Instruments and Controls
95