Table of Contents
Advertisement
5-14
Integration Volume
5.7
INSTALLATION CHECKLIST
This section offers a checklist of issues relating to the Octel 200/300 and NEAX-2400. The list is
presented in the order that the installation process should be followed. For details regarding any topic,
refer to the sections of this chapter pertaining to the issue.
Pre-Installation
Quantity Description
3
1
1 each
2
1
Item
1.
2.
3.
4.
Octel 200/300
S.4.1
Table 5-1 Equipment Required for Testing
2500-type telephone sets, one with message waiting allowed.
Terminal/teleprinter connected to the Octel 200/300 terminal port
Hard copy of the Octel 200/300 and NEAX-2400 database.
Extensions for testing, in addition to the port extension. One extension must have
message waiting allowed and be busy and RNA forwarded into the Octel 200/300
UCD group.
Breakout Box.
EITHER
NEC Misc. TTY-Y Cable, #241025
NEC − CA3 Straight Cable, #241026
OR
NEC Misc. TTY − Y Cable, #241025
NEC − CA1 Straight Cable, #241027
Table 5-2 The Octel 200/300 Requirements
Description
List the database. Highlight areas where changes are
required.
Make note of the following definitions for ports
Number of ports
-
Port extension numbers
-
Ensure that the Octel 200/300 port extensions match the
PBX extensions.
If different company greetings will be used, enter the
Access Code for each route into the TRUNK GROUP
Table. Obtain Access Code numbers from NEAX-2400
vendor.
Command
Complete
.L ALL
.L
.A TRUNK
PB60019-01
Advertisement
Chapters
Table of Contents
