Typical Meridian 1 Adaptive Integration Installation - Avaya Octel 200 Installation And Maintenance Manual

11.5 TELEPHONE INSTALLATION
This section contains an overview of the SIC8 telephone's connection and lists the equipment needed to
complete the installation.
.
Octel recommends that the M2616 telephones be placed in a locked cabinet to prevent tampering,
which would affect system operation.
Connection Overview
The SIC8 installation involves connecting RS-232C cables from the SIC8 I/O panel mounted on the rear
of the Octel 200/300 to a 2616 modular telephone set that is mounted on a shelf or rack. Each RS-232C
cable supports one link on the Octel 200/300. A 25-pair cable connects the SIC8 I/O panel to the physical
slot the SIC8 board resides in.
Octel 200/300
Installation Equipment Required
The following equipment is necessary for the installation of the SIC8 board:
M2616 modular telephones installed.
-
One RS-232C cable per modular telephone. Refer to Figure 11-4 for cable pinouts.
-
Octel 200/300 installation kit(s).
-
PB60019-01
Display Set Phones
p
Serial
Links
p
p
p
SIC8
HW
p
p
p
p
Digital Links
Figure 11-2 Typical Meridian 1 Adaptive Integration Installation
Meridian 1 Adaptive Integration
Analog Ports
M1 PBX
Octel 200/300
11-17
S.4.1