Table of Contents
Advertisement
8.2-34 Integration Volume
Actual Installation
Item
Description
1.
Modify System Parameter 9 to be 500 (increase flash
time).
2.
Modify System Parameter 116 to be YES.
3.
Add Attribute 9 to the COS of all mailboxes requiring
message waiting notification.
4.
All ports should be configured for outcall. (If not all
can be YES for outcall, then configure the higher
number ports to be YES.)
5.
Include changes in the
waiting on the RIC board.
6.
Modify System Parameter 79 to turn ON lamp MWI
Enter # * 1.
7.
Modify System Parameter 81 to turn OFF.
Enter # * 8
8.
Modify System Parameter 243 to add the pickup code
for 9006 Integration. Enter *3.
Octel 200/300
S.4.1
Table 8.2-4 Octel 200/300 Configuration Changes to MWI
able to support message
SLOTS T
Command
Complete
.M SYS 9
.M SYS 116
.A COS
.M SLOTS
.M SLOTS
.M SYS 79
.M SYS 81
.M SYS 243
PB60019-01
Advertisement
Chapters
Table of Contents
