Trunk Group Data Entry Screen; Station Extensions - Avaya Octel 200 Installation And Maintenance Manual

Page 1 of 5
Group Number: __
Reports? _
Group Name: T-XXX
Direction: __________
Dial Access? _
EXTNH
Queue Length: ___
tination:
Absorption List: _
Prefix-1? _
TRUNK PARAMETERS
Trunk Type: ____________
Outgoing Dial Type: ________
Trunk Termination: ______
ACA Assignment? _
Short Holding Time(secs.): ____
Test? ___
Answer Supervision Timeout: ______
Entry described in the instructions
italics
___(blank) Leave unchanged

Station Extensions

All of the DEFINITY G3i extensions must have their STATION data modified in order to work with
Adaptive Integration.
Configuration
The station extensions are configured as follows:
1. List the DEFINITY G3i stations.
2. Use the CHANGE command to modify one of the stations. Figure 7.1-13 shows an example of a
STATION data entry screen for a 2500 type phone. Extensions may be configured as other types of
stations, but the STATION data screen for the 2500 type phone illustrates the essential station
extension changes needed for use with Adaptive Integration.
3. Change the station's Name entry to fit this format as described in the Naming Conventions section in
this chapter. Example,
First XXX Last
First is the station owner's first name, XXX is the 3- to 8-digit station extension, and Last is the
station owner's last name.
PB60019-01
Outgoing Display? _
Restriction: ____
Figure 7.1-12 Trunk Group Data Entry Screen
LEGEND for Figure 7.1-12
DEFINITY G3 Adaptive Integration
TRUNK GROUP
Group Type: __
COR: __
Data Restriction? _
Busy Threshold: __
Disconnect Timing(msec): ____
Long Holding Time(hours): ___
Short Holding Threshold: ___
Suppress # Outpulsing? ____
7.1-23
SMDR
TAC: XXX
Night Service:
Incoming Des-
Digit
Maintenance
Octel 200/300 S.4.1