Table of Contents
Advertisement
7.2-8
Integration Volume
7.2.3 AT&T SYSTEM 75 CONFIGURATION
Several changes must be made to the System 75 configuration to use the Octel 200/300's Adaptive
Integration features. The System 75 configuration used for the Octel 200/300 with Adaptive Integration is
substantially different from the configuration used for a non-integrated the Octel 200/300
The changes to the configuration of the System 75 are divided into seven sections.
COR (Class of Restriction)
-
ATTIC Link Digital Telephone Extensions
-
ATTIC Link Hunt Group
-
Octel 200/300 Port Extensions
-
Coverage Paths
-
Trunk Groups
-
Station Extensions
-
.
In this chapter, the two ATTIC links are referred to as Link 1 and Link 2.
Naming Conventions
The System 75 allows each extension, pilot number or trunk group to have an alphanumeric name. This
name may be up to 15 characters long. If an extension is given a name, Adaptive Integration requires that
it meet certain restrictions. The port extensions and the link extensions must be given names.
Telephone Extensions
Trunk Groups
Octel 200/300
Port Extensions
Link Extensions
The name may contain any other information that is desired, but the strings specified above must precede
any other numeric characters. The character immediately following the string must be a non-numeric
character.
Octel 200/300
S.4.1
The name must contain the string XXXX
where XXXX is the extension number.
The number must not be preceded with T-, A-, or D-.
The name must contain the string T-XXXX
where XXXX is the trunk group number assigned in the Octel 200/300
TRUNK GROUP Table.
It is recommended that the T be in upper case.
The name must contain the string D-XXXX
where XXXX is the extension number of the Octel 200/300 port.
It is recommended that the D be in upper case.
The name must contain the string A-XXXX
where XXXX is the extension number of the Octel 200/300 digital link
port, or pilot number.
It is recommended that the A be in upper case.
PB60019-01
Advertisement
Chapters
Table of Contents
