Chapter 12.2 At&T System 75/Definity G1 Adaptive Integration With Apic - Avaya Octel 200 Installation And Maintenance Manual

Octel 200/300 Port
Extensions
The name may contain any other information that is desired, but the strings specified above must precede
any other numeric characters. The character immediately following the string must be a non-numeric
character.
The following are examples of valid names.
Valid Names for Extension 1234
Valid Names for Trunk Group 061
Valid Names for APIC Port 3333
The following are examples of invalid names.
Invalid Names for
Extension 1234
Invalid Names for
Trunk Group 061
Invalid Names for
Port 3333
COR Configuration Changes
A new COR (Classes of Restriction) for the Octel 200/300 ports (port COR) must be defined in the
System 75 for use with Adaptive Integration. This COR is assigned to the digital stations configured as
the message server ports.
Configure the System 75 CORs as follows, and check each step when complete. Configured screen
examples follow.
PB60019-01
AT&T System 75/Definity G1 Adaptive Integration with APIC
The name must contain the string D-XXXX,
where XXXX is the extension number of the Octel 200/300 APIC port.
The D should be in upper case in order for the call record to be
recognized.
Joe 1234 Jones
Joe Jones 1234
1234 Joe Dept. 4
T-061
T-061 InWATS
D-3333
Port D-3333
D-3333 message server port
Joe Jones No extension number.
Dept. 4 Joe 1234 A number precedes the extension
number and will be decoded as
extension 4.
T-1234 Joe Jones Contains trunk ID "T-".
Joe 1234 Jones Invalid extension number.
Josephine Johnson 123 Name with extension exceeds 16
characters.
Incoming Trunk No trunk number.
Trunk 061 Missing "T-".
999 First T-061 Number precedes trunk group.
3333 Missing "D-".
Port1 D-3333 A number precedes D-XXXX string
and will be decoded as extension.
12.2-9
Octel 200/300 S.4.1