Coverage Path Configuration Checklist - Avaya Octel 200 Installation And Maintenance Manual

Item Description
1. List all coverage paths and note which ones need to be changed.
2. Add and define any new coverage paths which are special applications.
3. Create a coverage path which has the attendant as its first coverage point.
4. Use the CHANGE command to modify one of the noted coverage paths.
5. Enter Hunt Group extension (EXTNH) as a COVERAGE POINT in the
coverage path.
6. Check COVERAGE CRITERIA. Make sure the number of rings for RNA is
one greater than the number of rings specified for in the Octel 200/300.
7. Repeat steps 4 through 6 for each coverage path which must be changed.
Item Description
1. List the existing DEFINITY G3i's trunk groups. Note those which are to be
directed to the Octel 200/300
2. Use the CHANGE command to modify one of the trunk groups.
3. Change the Group Name to fit this format: T-XXX.
XXX is the trunk group TAC.
4. If the trunk group is to be answered by the Octel 200/300 enter the number for
the Incoming Destination.
5. Repeat steps 2 through 4 for each trunk group listed in step 1.
PB60019-01
Table 7.1-6 Coverage Path Configuration Checklist
Table 7.1-7 G3i Trunk Groups Configuration Checklist
DEFINITY G3 Adaptive Integration
Complete
Complete
Octel 200/300
7.1-53
S.4.1