Changes For Called Party Identification - Avaya Octel 200 Installation And Maintenance Manual

7.3-22 Integration Volume
System Parameters
able
SLOTS T

Changes for Called Party Identification

To configure the Octel 200/300 with Called Party Identification on a System 85, the following
configuration changes must be made through the UPDATE program.
Mailbox COS
INFORMATION Table
Port COS
Octel 200/300 S.4.1
System Parameter 3 — PBX MODEL
Select the model number of the telephone system from the list.
System Parameter 116 — SHOULD INTEGRATION BE
ACTIVATED.
Modify System Parameter 116 to be .
System Parameter 170 — INTEGRATION LAMP ON/OFF LINK
MUST MATCH.
Modify System Parameter 170 to be YES.
For each integration unit configured with one or more message waiting
links, the following is also configured:
Whether the link is enabled to perform lamp message waiting
-
notification (MWN)
Whether the link is used as the system default link or lamp MWN
-
Specific COS or ranges of COS for which the link is to perform
-
lamp MWN
.
Only one default must be defined for message waiting to operate
correctly.
Refer to the Configuration volume, SLOTS Table, How to Configure
the Slots Table section, for more information.
COS Attribute 15 — TRANSFER TO A RINGING EXTENSION
Assign a COS with Attribute 15 to mailboxes of extensions that the
System 85 forwards to the Octel 200/300.
INFORMATION Table Index 25 — QUICK GREETING
ACTIVATION
Modify Information Table Index 25 to YES to allow selected direct
internal callers to change and turn ON/OFF their personal greetings
without first entering their mailboxes.
COS Attribute 58 — DO NOT USE THIS PORT FOR
INTEGRATION
Assign this COS attribute to those Octel 200/300 ports used in special
applications that do not require integration.
PB60019-01