Example Station Data Entry Screen For A Station Extension - Avaya Octel 200 Installation And Maintenance Manual

7.1-24 Integration Volume
The station's extension number must be included in the Name entry for the extension to be properly
integrated. Enclosing the station extension within the station owner's name in the Name entry
preserves the functionality of the DEFINITY G3i's directory feature.
Extension numbers are typically the same as the Octel 200/300 mailbox numbers associated with
them.
4. (Message waiting indication only) If the station has a message waiting indicator, enable "Leave
Word Calling Reception" by entering a Y in the LWC Reception? entry in that station's COS.
5. Assign a coverage path to the station using the coverage path entry.
6. Repeat steps 2 through 5 for each station that is to be integrated.
Page 1 of 1
STATION
Extension:
XXX
Type:2500
Port:________
Name:Joe XXX Smith
FEATURE OPTION
LWC Reception?
LWC Activation? _
Redirect Notification? _
Off Premise Station? _
Distinctive Audible Alert? _
Message Waiting Indicator?
Switchhook Flash?
ABBREVIATED DIALING
List1: ________
List3: ________
HOT LINE DESTINATION
Abbreviated Dialing List Number (From above 1, 2 or 3):
Figure 7.1-13 Example STATION Data Entry Screen for a Station Extension
italics Entry described in the instructions
blank Leave unchanged
Octel 200/300 S.4.1
Lock Messages: ____
Security Code: ___
Coverage Path: ___
Coverage Msg Retrieval Permission? _
y
Data Restriction? _
Call Waiting Indication? _
Att: Call Waiting Indication? n
LEGEND for Figure 7.1-13
COR:
COS:
Tests:__
List2: ________
Dial Code: __
__ Room:
__ Jack:
Cable:
__
PB60019-01