Octel 200/300/Neax-2400 Installation; Cable Connection, Option; Cable Connection 1 - Avaya Octel 200 Installation And Maintenance Manual

5.5

OCTEL 200/300/NEAX-2400 INSTALLATION

The Octel 200/300 is connected to the NEAX-2400 data link via a special RS-232C cable connected to
the Octel 200/300 RS-232C interface port.
One data link must be configured for each Octel 200/300 cabinet. Every port/extension associated with
the data link must be in the same Octel 200/300 hunt group. In a collocated Octel 200/300 installation,
each cabinet must have a dedicated data link.
There are two choices for cable connection. A description of each follows.

Cable Connection 1

Connect the following three cables as shown in the drawing below:
Part Nos.
PBX
Misc. TTY
#241025
Cable Connection 2
Connect the following three cables as shown in the drawing below:
Part Nos.
PBX
PB60019-01
1) NEC Misc. TTY, #241025
2) NEC TTY − CA3, #241026
3) Custom Cable
TTY−CA3
#241026
Figure 5-2 Cable Connection, Option 1
1) NEC Misc. TTY, #241025
2) NEC TTY − CA1, #241027
3) DID Cable/Null Modem Cable
(Refer to the Installation and Maintenance volume,
Installation, Connecting External Modem section, for more information
TTY−CA1
Misc. TTY
#241027
#241025
Figure 5-3 Cable Connection, Option 2
NEAX-2400 Adaptive Integration
Custom Cable
Octel 200/300
(System
Terminal
Port)
DID Cable/
Null Modem Cable
( )
Port B
5-9
Octel 200/300
Octel 200/300 S.4.1