Table of Contents
Advertisement
Item
Description
1.
List the existing System 85's trunk groups. Note those that are to be directed to
the Octel 200/300.
2.
Change Trunk Groups Name field to be answered by the Octel 200/300 to read
T-XXX (XXX = Trunk Group Access Code in the PBX).
3.
Write down the Trunk Access Code Group Number in the System 85. These
are needed for the Octel 200/300 configuration.
Item
Description
1.
List the current System 85 stations.
2.
Change the stations name field to fit XXX First Name, Last Name (XXX =
extension number)
3.
If station has lamp message waiting, LWC must be enabled in its COS in the
PBX.
4.
Assign the stations to be forwarded to the Octel 200/300 to an appropriate call
coverage group that includes the Octel 200/300 as a point of coverage.
Actual Installation
Item
Description
1.
Assign a COS with Attribute 9 to those mailboxes of ex-
tension that should have message waiting indication
(MWI)
2.
Modify System Parameter 3 (PBX type is System 85)
3.
Modify System Parameter 116 to be YES.
4.
Modify System Parameter 170 to be YES.
5.
Mailbox and extension numbers should match.
PB60019-01
Table7.3-6 AT&T 85 Trunk Groups Configuration Checklist
Table7.3-7 Station Configuration Checklist
Table7.3-8 Configuration for MWI
AT&T System 85/Definity G2 Adaptive Integration
Command
.A COS
.M SYS 3
.M SYS 116
.M SYS 170
7.3-47
Complete
Complete
Complete
Octel 200/300
S.4.1
Advertisement
Chapters
Table of Contents
