The Octel 200/300 Configuration Changes For Mwi - Avaya Octel 200 Installation And Maintenance Manual

9-18 Integration Volume
Table 9-7 The Octel 200/300 Configuration Changes for MWI
Item Description
1. Modify System Parameter 3 —
type for the Millennium.
2. Modify System Parameter 51 —
WITH PBX
3. Modify System Parameter 83 —
FOR EACH NEW MSG,
4. Modify System Parameter 166 —
ONLY IF NO MESSAGES,
YES to turn OFF the lamp only if there are no messages,
NO to turn OFF the lamp when the mailbox is accessed,
even if the messages are not listened to or erased.
5. Modify System Parameter 180 —
FOR PBX INTEGRATION
= 8 bits/no parity.
6. Assign COS Attribute 9 —
MESSAGE WAITING
activated to light lamps.
Octel 200/300 S.4.1
PBX TYPE
RS-232 INTEGRATION
to YES.
LAMP MW: LIGHT LAMP
to YES.
LAMP MW: TURN OFF
to YES or NO.
RS-232 BYTE FORMAT
to 0 or 1. 0 = 7 bits/even parity; 1
LAMP OR DISPLAY PHONE
only to mailboxes that will have MWI
Command
, to 01, the PBX
.
M SYS 3
.M SYS 51
.M SYS 83
.M SYS
166
.M SYS
180
.A COS
Complete
PB60019-01