Table of Contents
Advertisement
7.1-52
Integration Volume
Item
Description
1.
List CORs currently in use on the DEFINITY G3i.
2.
Designate two new CORs to be exclusively for Octel 200/300(COR DP &
COR LK).
3.
Designate a COR to be used for the operator.
4.
Designate a COR to be used for the trunks terminating at the Octel 200/300.
5.
Change the COR (referred to as COR LK). Set up COR LK; under calling
permission enter Y for all other CORs.
6.
Change COR for the Octel 200/300 ports. (Referred to as COR LKDP). Set up
COR LK, under calling permission enter Y for all other CORs on the system.
7.
Change each COR on the system. Make sure calling permission is Y for COR
LK and N for COR LKDP. All other calling permission entries should be
unchanged.
8.
Verify that COR LK and COR LKDP are only used for Links, for the Octel
200/300 the operator, and on trunks terminating at the Octel 200/300.
Item
Description
1.
Allocate a Hunt Group pilot number to be used for access to the Octel 200/300.
2.
Add the digital stations configured for the ATTIC
3.
Set up page 1 of the Link 1 Station Data. Type should be 7405D. See
Figure 7.1-4 and Figure 7.1-5.
4.
Set up page 3 of the Link 1 Station Data, Feature Button Assignments. See
Figure 7.1-6.
5.
Set up page 4 of the Link 1 Station Data, Display Button Assignments. See
Figure 7.1-7.
6.
Repeat for all links.
7.
Set up page 1 of Link 2 station data. "Type" should be 7405D. See Figure
7.1-5.
Octel 200/300
S.4.1
Table 7.1-4 Class of Restriction Checklist
Table 7.1-5 ATTIC Link Digital Phone Extension Checklist
Complete
Complete
PB60019-01
Advertisement
Chapters
Table of Contents
