Related Manuals for Avaya 1101GT
Summary of Contents for Avaya 1101GT
- Page 1 Open Networking Adapter 1101GT Quick Install Guide © 2016 Avaya Inc. NN48800-300 01-07 (700511108)
- Page 2 Notice While reasonable efforts have been made to ensure that the information in this document is complete and accurate at the time of printing, Avaya assumes no liability for any errors. Avaya reserves the right to make changes and correc- tions to the information in this document without the obligation to notify any person or organization of such changes.
- Page 3 This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regula- tions. Cet appareil numérique de la Classe B respecte toutes les exigencies du Règle- ment sur le materiel brouiller du Canada. © 2016 Avaya Inc. NN48800-300 01-07 (700511108)
- Page 4 Specifically, restricted materials under the RoHS Directive are Lead (including solder used in PCBs), Cadmium, Mercury, Hexavalent Chromium, and Bromine. Avaya declares compliance with the European Union (EU) RoHS Directive (2011/65/EU) in that Lead, which is a restricted hazardous substance, is used only in accordance to the exemption(s) to Article 4(1), item 7 granted by the European Union.
- Page 5 This Quick Install Guide provides an overview of your Open Networking Adapter (ONA). For information about connecting the ONA to the Fabric Connect network, go to the Avaya Support website, http://support.avaya.com and download the latest documents for your Avaya Virtual Services Platform switch.
- Page 6 The 16 total MAC addresses available start with the address reported above in the MAC field and includes the next 15 consecutive addresses.) PEC:EC1100010-E6 (Avaya part number) MAN:AVAYA (Manufacturer’s name — Avaya) MOD:ONA 1101GT (Model number) REV:xxx (Revision number of this ONA) © 2016 Avaya Inc.
- Page 7 ONA, or any location you desire. There are four slots on the top of the ONA and four slots on the bottom to give you multiple options for securing the ONA. © 2016 Avaya Inc. NN48800-300 01-07 (700511108)
- Page 8 If necessary, you can reset your ONA by inserting a paper clip into the reset switch pin hole and pressing the switch for more than 1 second but less than 5 seconds. © 2016 Avaya Inc. NN48800-300 01-07 (700511108)
- Page 9 On the Device side of the ONA, insert a paper clip into the reset switch and depress it for at least five seconds. This action clears the parameters so they are all empty fields (except for Operating Mode) and then resets the ONA. © 2016 Avaya Inc. NN48800-300 01-07 (700511108)
- Page 10 - Subnet mask in the “Management IP Subnet Mask” field - Default gateway in the “Default Gateway IP Address” field - (For SDN Controller Mode only) IP address of the controller in the “SDN Controller IP Address or Name” field © 2016 Avaya Inc. NN48800-300 01-07 (700511108)
- Page 11 Fabric Attach feature, which is used to establish control plane communication between the ONA and the SDN Controller. In this mode, the ONA must be connected to an Avaya SDN controller, which controls and manages the ONA. The SDN Controller Mode provides additional capabilities to the ONA such as the ability to upgrade software.
- Page 12 On the PC, use a browser to connect to the ONA configuration menu with the address http://192.168.100.1. Click Edit Parameters. Modify the configuration parameters that you want to change. To enable Fabric Extend, change the Operational Mode parameter to 1. © 2016 Avaya Inc. NN48800-300 01-07 (700511108)
-
Page 13: System Status Led
Click “Save” to store the parameters in persistent memory. Click “Return to Configuration page.” 10. Click “Reboot into Operational Mode.” 11. Disconnect the PC. System Status LED The System Status LED is visible from either side of the unit. © 2016 Avaya Inc. NN48800-300 01-07 (700511108) - Page 14 Blue (slow blinking) Diagnostics Red (fast blinking) Indicates an Error (However, a short blinking red is normal at startup.) Magenta (slow blinking) Indicates that diagnostic tests are now passing, but previous tests failed. © 2016 Avaya Inc. NN48800-300 01-07 (700511108)
-
Page 15: Power Led
Power LED The Power LED is visible from either side of the unit. Label Color and Status Description Power Blue (steady) Operating normally Blue (blinking) ONA is starting Not operational © 2016 Avaya Inc. NN48800-300 01-07 (700511108) - Page 16 Green (blinking) 10 Mbps Link/Activity Amber (steady) Amber (blinking) Green (steady) Blink rate indicates level of link activity Green (blinking) Blink rate indicates level of link activity Green (blinking slow) Port disabled No Link © 2016 Avaya Inc. NN48800-300 01-07 (700511108)
- Page 17 Disconnect the ONA from the network switch and any device it may be attached to. Use an Ethernet cable to connect the ONA Device port to its Network port, as a loopback is required to run diagnostics. © 2016 Avaya Inc. NN48800-300 01-07 (700511108)
- Page 18 (for a continuous error in the test) or slow blinking Magenta (tests are now passing but previous tests failed). If the ONA fails, return it to Avaya. The diagnostic tests do not exit automatically. You have to power cycle the ONA by disconnecting the Ethernet loopback cable and the external power adapter.
- Page 19 This method uses a PC to access the ONA’s Manual Configuration menu. From the PC that you are going to use for this upgrade procedure, go to the Avaya Support website, http://support.avaya.com, and download the ONA software image that you want to use.
- Page 20 10. Click Return to Configuration page. 11. Click Reboot into Operational Mode. Disconnect the PC. Upgrading a deployed ONA Refer to the ONA Release Notes (NN48800-400) for latest information on upgrading ONA software on a deployed device. © 2016 Avaya Inc. NN48800-300 01-07 (700511108)