Octel 200/300 Configuration For Centrex Smdi; Configuration Changes Required For Mwi And Cpi - Avaya Octel 200 Installation And Maintenance Manual

4.4
OCTEL 200/300
Mailbox and station numbers may or may not match in the USER Table.
For message waiting indication, Centrex activates and deactivates the MWI for the extension number
-
associated with the mailbox in the USER Table.
For called party identification, Centrex uses the extension number in the SMDI call record to identify
-
the calling and called mailbox numbers.
.
If you need to define mailboxes that do not match the extension number, use the PREFIX DIGIT
Table. For example, a customer wants 7-digit mailboxes, but uses 4-digit dialing plan.

Configuration Changes Required for MWI and CPI

The following modification is required for MWI and CPI.
COS
System Parameters
PB60019-01
CONFIGURATION FOR CENTREX SMDI
COS Attribute 9 — LAMP OR DISPLAY PHONE MESSAGE
WAITING
Assign COS Attribute 9 only to mailboxes that should have MWI
activated. Instead of a message waiting call, stutter dial tone is given.
Calls may still be made offsite.
System Parameter 51 — RS-232 INTEGRATED WITH PBX
Modify the value of this System Parameter to be YES.
If this parameter is modified, the message server must be restarted
before the RS-232 integration is changed.
System Parameter 117 — RINGBACKS BEFORE ANSWERING
AX PORT
In most cases, the Octel 200/300 receives the call record within the first
ring of the forwarded call. The Octel 200/300 answers the call as soon
as the call record is received. If after "n" rings (defined in System
Parameters the call record has still not been received, the caller hears
the company greeting instead of the called party's station/name or
greeting. As a fail-safe measure, it is recommended that the value of
System Parameters be set at 5.
System Parameter 130 — SEND DTMF A FOR FORWARDED
CALLS
Modify the value of this System Parameter to be YES. This enables the
Octel 200/300 to identify when a Message Waiting call or screened
transfer has forwarded back to an Octel 200/300 port.
Centrex SMDI/SMSI Adaptive Integration
Octel 200/300
4-7
S.4.1