Table of Contents
Advertisement
8.1-36 Integration Volume
Item
Description
1.
Forward Octel 200/300 ports.
2.
Turn OFF power to the D.I.A.L. cabinet
3.
Plug the card into the slot that is configured for integra-
tion. Refer to the ROLM Board Installation section,
and monitor the LEDs.
Item
Description
1.
Configure the display phones as 400s. Assign a unique primary line
extension number to the designated button on each phone. See Figure 8.1-1
through Figure 8.1-3.
2.
Configure Octel 200/300 port appearances on both display phones on
designated buttons. See Figure 8.1-1 through Figure 8.1-3.
3.
Configure the MSG CTR feature on both display phones on designated
button. See Figure 8.1-1 through Figure 8.1-3.
4.
Configure Octel 200/300 ports into a hunt group with a RNA and busy
fail-safe.
5.
Configure user phones that want Adaptive Integration features to RNA and
busy forward into Octel 200/300 hunt group.
6.
Trunks to be answered by Octel 200/300 must be dedicated to Octel 200/300
hunt group using the CBX (DED) feature.
Octel 200/300
S.4.1
Table 8.1-7 Installing the RIC Board
Table 8.1-8 ROLM Configuration
Command
Complete
@TE C 1
Complete
PB60019-01
Advertisement
Chapters
Table of Contents
