Table of Contents
Advertisement
7.1.4 OCTEL 200/300 CONFIGURATION
This section describes the changes that must be made to the Octel 200/300 configuration for message
waiting indication and called party identification.
Refer to the Product Description volume, General Description chapter, for system capacity information
and to the Configuration volume, SLOTS Table, for instructions on configuring the card and message
waiting. For the DEFINITY G3i, all of the integrated ports should be configured as line appearances on
all of the integration units which are processing calls.
External Call Configuration. The DEFINITY G3i provides the Octel 200/300 with the Trunk Group
number of an external call. The TRUNK GROUP Table enables the Octel 200/300 to process the call
according to the trunk group on which the call was received instead of which port answered the call on.
This means integrated ports do not need to be split. Examples of how this can be applied include
A different company greeting may be used for each trunk group.
-
External and internal callers can have different intercept positions.
-
Different intercept positions can be defined for each trunk group.
-
Refer to the Configuration volume, TRUNK GROUP Table chapter, for more information.
Internal Call Configuration. MWI provides message waiting indication from the Octel 200/300 for
phones equipped with a message waiting lamp. COS Attribute 9 — LAMP OR DISPLAY PHONE
MESSAGE WAITING is assigned to extensions that have MWI.
Called party identification provides several enhanced mailbox features for direct internal callers as
described in DEFINITY G3 Requirements, Operation of DEFINITY G3i Adaptive Integration, called
party identification call processing. Every Octel 200/300 mailbox may use all of these features without
additional configuration. Index 25 must be defined as YES to permit selected people to access their
personal greetings without entering their mailbox. This access is possible only when a person is calling
the Octel 200/300 directly from the extension associated with their mailbox.
Changes for Message Waiting Indication
To configure the Octel 200/300 with message waiting notification on a DEFINITY G3i, the following
configuration changes must be made through the UPDATE program.
.
Refer to the Adaptive Integration chapter in this volume for MWI configuration considerations.
Caution!
PB60019-01
Mailbox and extension numbers must match for
message waiting indication to operate correctly.
DEFINITY G3 Adaptive Integration
Octel 200/300
7.1-25
S.4.1
Advertisement
Chapters
Table of Contents
