Check The Hydraulic Oil Level; Check The Engine Coolant Level - Genie Z-60/34 Operator's Manual

Operator's Manual
Maintenance

Check the Hydraulic Oil Level

Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes in oil
level that might indicate the presence of hydraulic
system problems.
1 Be sure that the boom is in the stowed position,
then visually inspect the sight gauge located on
the side of the hydraulic oil tank. The hydraulic
oil level should be within the top 5 cm of the
sight gauge.
2 Add oil as needed.
Hydraulic oil specifications
Hydraulic oil type
50
Chevron Rykon
Premium MV equivalent
Z-60/34
Seventh Edition · First Printing

Check the Engine Coolant Level

- Ford and Perkins Models
Maintaining the engine coolant at the proper level is
essential to engine service life. Improper coolant
level will affect the engine's cooling capability and
damage engine components. Daily checks will
allow the inspector to identify changes in coolant
level that might indicate cooling system problems.
Burn hazard. Beware of hot engine parts and
coolant. Contact with hot engine parts and/or
coolant may cause severe burns.
1 Check the fluid level in the coolant recovery
tank. The fluid level should be at the
mark.
FULL
2 Add fluid as needed.
Note: Do not remove the radiator cap.
Part No. 133083