Siemens SINAMICS G150 Manual page 1275

Table 4-4 Message classes and coding of various diagnostic interfaces, continued
Text of the message class (number according to PROFIdrive)
Cause and remedy.
Error in the parameterization/configuration/commissioning
procedure (18)
An error was identified in the parameterization or in a commissioning
procedure, or the parameterization does not match the actual device
configuration. Determine the precise cause of the fault using the
commissioning tool. Adapt the parameterization or device
configuration.
General drive fault (19)
Group fault. Determine the precise cause of the fault using the
commissioning tool.
Auxiliary unit fault (20)
The monitoring of an auxiliary unit (incoming transformer, cooling
unit ...) has detected an illegal state. Determine the exact cause of the
fault and check the relevant device.
1. Undervoltage condition of the electronics power supply
2. Overvoltage condition of the electronics power supply
Drive object:
Each message (fault/alarm) specifies the drive object in which it can be found.
A message can belong to either one, several, or all drive objects.
Reaction: Default fault reaction (adjustable fault reaction)
Specifies the default reaction in the event of a fault.
The optional parentheses indicate whether the default fault reactions can be changed and
which fault reactions can be adjusted via parameters (p2100, p2101).
Note
See Table "Fault reactions" (Page 1267).
Acknowledgement: Default acknowledgement (adjustable acknowledgement)
Specifies the default method of acknowledging faults after the cause has been eliminated.
The optional parentheses indicate whether the default acknowledgement can be changed and
which acknowledgement can be adjusted via parameters (p2126, p2127).
Note
See Table "Acknowledging faults" (Page 1269).
SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
4.1 Overview of faults and alarms
Diagnostics interface
PN DS1 DP
(hex) (dec) (dec)
9011 17 31
9012 18 9
9013 19 29
4 Faults and alarms
ET 200 NAMUR
(dec) (r3113.x)
16 15
9 15
26 15
1275